D-Link xStack DGS-3120 Series - Page 361

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
356
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCPv6 local relay function for the default VLAN:
DGS-3120-24TC:admin#config dhcpv6_local_relay vlan default state enable
Command: config dhcpv6_local_relay vlan default state enable
Success.
DGS-3120-24TC:admin#
28-10 enable dhcpv6_local_relay
Description
This command is used to enable the DHCPv6 local relay function on the Switch.
Format
enable dhcpv6_local_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCPv6 local relay function’s global state:
DGS-3120-24TC:admin#enable dhcpv6_local_relay
Command: enable dhcpv6_local_relay
Success.
DGS-3120-24TC:admin#
28-11 disable dhcpv6_local_relay
Description
This command is used to disable the DHCPv6 local relay function on the Switch.
Format
disable dhcpv6_local_relay