D-Link xStack DGS-3120 Series - Page 379

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
374
Format
config name_server delete [<ipaddr> | <ipv6addr>] {primary}
Parameters
<ipaddr> - Enter the DNS Resolver name server IPv4 address used here.
<ipv6addr> - Enter the DNS Resolver name server IPv6 address used here.
primary – (Optional) Specify that the name server is a primary name server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete DNS Resolver name server 10.10.10.1:
DGS-3120-24TC:admin# config name_server delete 10.10.10.10
Command: config name_server delete 10.10.10.10
Success.
DGS-3120-24TC:admin#
31-3 config name_server timeout
Description
This command is used to configure the timeout value of a DNS Resolver name server.
Format
config name_server timeout <sec 1-60>
Parameters
timeout - Specify the maximum time waiting for a responce from a specified name server.
<sec 1-60> - Enter the timeout value used here. This value must be between 1 and 60
seconds.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure DNS Resolver name server time out to 10 seconds: