D-Link xStack DGS-3120 Series - Page 380

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
375
DGS-3120-24TC:admin# config name_server timeout 10
Command: config name_server timeout 10
Success.
DGS-3120-24TC:admin#
31-4 show name_server
Description
This command is used to display the current DNS Resolver name servers and name server time
out on the Switch.
Format
show name_server
Parameters
None.
Restrictions
None.
Example
To display the current DNS Resolver name servers and name server time out:
DGS-3120-24TC:admin# show name_server
Command: show name_server
Name Server Time Out: 3 seconds
Static Name Server Table:
Server IP Address Priority
--------------------- --------------
20.20.20.20 Secondary
10.1.1.1 Primary
Dynamic Name Server Table:
Server IP Address Priority
--------------------- --------------
10.48.74.122 Primary
DGS-3120-24TC:admin#