D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
377
Example
To delete the static host name entry “www.example.com”:
DGS-3120-24TC:admin# delete host_name www.example.com
Command: delete host_name www.example.com
Success.
DGS-3120-24TC:admin#
31-7 show host_name
Description
This command is used to display the current host name.
Format
show host_name {static | dynamic}
Parameters
static – (Optional) Specify to display the static host name entries.
dynamic – (Optional) Specify to display the dynamic host name entries.
Restrictions
None.
Example
To display the static and dynamic host name entries:
DGS-3120-24TC:admin#show host_name
Command: show host_name
Static Host Name Table
Host Name : www.example1.com
IP Address : 20.20.20.20
IPv6 Address : 3000::1
Host Name : www.example2.com
IP Address : 10.10.10.10
IPv6 Address : 1000::1
Host Name : www.example3.com
IP Address : 4.4.4.4
Host Name : www.example4.com
IPv6 Address : 4000::1

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)