D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
433
12 characters long.
If no parameter is specified, the system will display all IGMP static groups.
Restrictions
None.
Example
To display all IGMP static groups on the interface “n20”:
DGS-3120-24TC:admin#show igmp static_group ipif n20
Command: show igmp static_group ipif n20
Interface Multicast Group
------------ ---------------
n20 239.0.0.3
Total Entries: 1
DGS-3120-24TC:admin#
To display all IGMP static groups on all interfaces:
DGS-3120-24TC:admin#show igmp static_group
Command: show igmp static_group
Interface Multicast Group
------------ ---------------
System 225.0.0.1
System 225.0.0.2
n20 239.0.0.3
Total Entries: 3
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)