D-Link xStack DGS-3120 Series - Page 437

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
432
Format
delete igmp static_group ipif <ipif_name 12> [group <multicast_ipaddr> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used for this configuration. This name can be up to
12 characters long.
group - Specify the multicast IP address used.
<multicast_ipaddr> - Enter the multicast IP address used here.
all – Specify that all the multicast IP addresses will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the IGMP static group, with the multicast IP address 225.0.0.2 on the IP interface
“System”.
DGS-3120-24TC:admin#delete igmp static_group ipif System group 255.0.0.2
Command: delete igmp static_group ipif System group 255.0.0.2
Success.
DGS-3120-24TC:admin#
To delete all IGMP static groups on the IP interface “n2”.
DGS-3120-24TC:admin#delete igmp static_group ipif n2 all
Command: delete igmp static_group ipif n2 all
Success.
DGS-3120-24TC:admin#
40-8 show igmp static_group
Description
This command is used to display IGMP static groups on the Switch.
Format
show igmp static_group {ipif <ipif_name 12>}
Parameters
ipif – (Optional) Specify the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name, to be displayed, here. This name can be up to