D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
455
Restrictions
None.
Example
To show IGMP snooping groups when IGMP v3 is supported:
DGS-3120-24TC:admin# show igmp_snooping group
Command: show igmp_snooping group
Source/Group : 10.0.0.1/225.0.0.1
VLAN Name/VID : default/1
Member Ports : 1:5
UP Time : 6
Expiry Time : 254
Filter Mode : INCLUDE
Source/Group : 10.0.0.10/225.0.0.1
VLAN Name/VID : default/1
Member Ports : 1:5
UP Time : 6
Expiry Time : 254
Filter Mode : INCLUDE
Source/Group : NULL/239.255.255.250
VLAN Name/VID : default/1
Member Ports : 1:5
UP Time : 2
Expiry Time : 258
Filter Mode : EXCLUDE
Total Entries: 3
DGS-3120-24TC:admin#
DGS-3120-24TC:admin# show igmp_snooping group data_driven
Command: show igmp_snooping group data_driven
Source/Group : NULL/225.0.0.5
VLAN Name/VID : default/1
Reports : 0
Member Ports :
Router Ports : 24
UP Time : 3 days 50 mins
Expiry Time : 120 secs
Filter Mode : EXCLUDE
Total Entries : 1
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)