D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
468
DGS-3120-24TC:admin# delete address_binding blocked vlan_name v31 mac_address
00-00-00-00-00-11
Command: delete address_binding blocked vlan_name v31 mac_address 00-00-00-00-
00-11
Success.
DGS-3120-24TC:admin#
43-6 delete address_binding ip_mac
Description
This command is used to delete an IMPB entry.
Format
delete address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr> |
ipv6address <ipv6addr> mac_address <macaddr>]
Parameters
all - Specify that all the MAC address will be used.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the IP address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
ipv6address - Specify the learned IPv6 address of the entry in the database.
<ipv6addr> - Enter the IPv6 address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a blocked address:
DGS-3120-24TC:admin#delete address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3120-24TC:admin#
43-7 config address_binding ip_mac
Description
This command is used to update an IMPB entry.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)