D-Link xStack DGS-3120 Series - Page 481

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
476
43-15 show address_binding dhcp_snoop binding_entry
Description
This command is used to display the DHCP snooping binding entries.
Format
show address_binding dhcp_snoop binding_entry {port <port>}
Parameters
port – (Optional) Specify the port used for this configuration.
<port> - Enter the port number used here.
Restrictions
None.
Example
To display the DHCP snooping binding entries:
DGS-3120-24TC:admin#show address_binding dhcp_snoop binding_entry
Command: show address_binding dhcp_snoop binding_entry
S (Status) - A: Active, I: Inactive
Time - Left Time (sec)
IP Address MAC Address S LT(sec) Port
--------------------------------------- ----------------- -- ---------- -----
10.62.58.35 00-0B-5D-05-34-0B A 35964 1
10.33.53.82 00-20-c3-56-b2-ef I 2590 2
Total Entries : 2
DGS-3120-24TC:admin#
43-16 show address_binding dhcp_snoop limit_rate
Description
This command is used to display the DHCP snooping limit rate entries.
Format
show address_binding dhcp_snoop limit_rate {ports <portlist>}
Parameters
port – (Optional) Specify the port used for this configuration.
<port> - Enter the port number used here.