D-Link xStack DGS-3120 Series - Page 482

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
477
Restrictions
None.
Example
To display the DHCP snooping limit rate entries:
DGS-3120-24TC:admin#show address_binding dhcp_snoop limit_rate
Command: show address_binding dhcp_snoop limit_rate
Port Rate Limit (pps) Action
------ ---------------- ---------
1:1 No Limit -
1:2 No Limit -
1:3 No Limit -
1:4 No Limit -
1:5 No Limit -
1:6 No Limit -
1:7 No Limit -
1:8 No Limit -
1:9 No Limit -
1:10 No Limit -
1:11 No Limit -
1:12 No Limit -
1:13 No Limit -
1:14 No Limit -
1:15 No Limit -
1:16 No Limit -
1:17 No Limit -
1:18 No Limit -
1:19 No Limit -
1:20 No Limit -
1:21 No Limit -
1:22 No Limit -
1:23 No Limit -
1:24 No Limit -
DGS-3120-24TC:admin#
43-17 config address_binding dhcp_snoop max_entry
Description
This command is used to specify the maximum number of entries that can be learned by a
specified port.
Format
config address_binding dhcp_snoop max_entry ports [<portlist> | all] limit [<value 1-50> |
no_limit] {ipv6}