D-Link xStack DGS-3120 Series - Page 488

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
483
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear ND snooping entry on ports 1:1-1:3:
DGS-3120-24TC:admin#clear address_binding nd_snoop binding_entry ports 1:1-1:3
Command: clear address_binding nd_snoop binding_entry ports 1:1-1:3
Success.
DGS-3120-24TC:admin#
43-25 enable address_binding trap_log
Description
This command is used to send traps and logs when the IMPB module detects an illegal IP and
MAC address.
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the IMPB traps and logs:
DGS-3120-24TC:admin# enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DGS-3120-24TC:admin#
43-26 disable address_binding trap_log
Description
This command is used to disable the IMPB traps and logs.