D-Link xStack DGS-3120 Series - Page 538

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
533
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure a JWAC user:
DGS-3120-24TC:admin#config jwac user 112233
Command: config jwac user 112233
Enter a old password:*****
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DGS-3120-24TC:admin#
49-23 delete jwac
Description
This command is used to delete JWAC users from the local database.
Format
delete jwac [user <username 15> | all_users]
Parameters
user - Specify the user name to be deleted.
<username 15> - Specify the user name to be deleted. The user name can be up to 15
characters long.
all_users - Specify all user accounts in the local database will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a JWAC user from the local database:
DGS-3120-24TC:admin#delete jwac user 112233
Command: delete jwac user 112233
Success.
DGS-3120-24TC:admin#