D-Link xStack DGS-3120 Series - Page 539

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
534
49-24 show jwac user
Description
This command is used to display JWAC users in the local database.
Format
show jwac user
Parameters
None.
Restrictions
None.
Example
To display the current JWAC local users:
DGS-3120-24TC:admin#show jwac user
Command: show jwac user
User Name Password VID
---------------- ---------------- ----------
112233 12345 -
123 123 1
Total Entries:2
DGS-3120-24TC:admin#
49-25 clear jwac auth_state
Description
This command is used to clear authentication entries.
Format
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating | blocked} |
mac_addr <macaddr>]
Parameters
ports - Specify the port range to delete hosts on.
all - Specify to delete all ports.
<portlist> - Specify range of ports to delete.
authenticated - (Optional) Specify the state of host to delete.