D-Link xStack DGS-3120 Series - Page 572

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
567
Parameters
<portlist> - (Optional) Specified a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
mode – (Optional) Specify to display the information in various modes.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default display mode.
detailed - Display the information in detailed mode.
Restrictions
None.
Example
To display remote table in brief mode:
DGS-3120-24TC:admin# show lldp remote_ports 1:1-1:2 mode brief
Command: show lldp remote_ports 1:1-1:2 mode brief
Port ID: 1
----------------------------------------------------------------------
Remote Entities count : 3
Entity 1
Chassis ID Subtype : MACADDRESS
Chassis ID : 00-01-02-03-04-01
Port ID Subtype : LOCAL
Port ID : 1/3
Port Description : RMON Port 1 on Unit 3
Entity 2
Chassis ID Subtype : MACADDRESS
Chassis ID : 00-01-02-03-04-02
Port ID Subtype : LOCAL
Port ID : 1/4
Port Description : RMON Port 1 on Unit 4
Port ID : 2
---------------------------------------------------------------------
Remote Entities count : 3
Entity 1
Chassis ID Subtype : MACADDRESS
Chassis ID : 00-01-02-03-04-03
Port ID Subtype : LOCAL
Port ID : 2/1
Port Description : RMON Port 2 on Unit 1
Entity 2
Chassis ID Subtype : MACADDRESS
Chassis ID : 00-01-02-03-04-04
Port ID Subtype : LOCAL
Port ID : 2/2
Port Description : RMON Port 2 on Unit 2