D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
566
Aggregation Port ID : 0
Maximum Frame Size : 1536
DGS-3120-24TC:admin#
To display outbound LLDP advertisements for port 1 in normal mode:
DGS-3120-24TC:admin#show lldp local_ports 1:1 mode normal
Command: show lldp local_ports 1:1 mode normal
Port ID : 1:1
-----------------------------------------------------------------------------
Port ID Subtype : MAC Address
Port ID : 00-01-02-03-04-01
Port Description : D-Link DGS-3120-24TC R2.00.010
Port 1 on Unit 1
Port PVID : 1
Management Address Count : 2
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
DGS-3120-24TC:admin#
To display outbound LLDP advertisements for port 1 in brief mode:
DGS-3120-24TC:admin# show lldp local_ports 1:1 mode brief
Command: show lldp local_ports 1:1 mode brief
Port ID 1:
-----------------------------------------------------------------------
Port ID Subtype : LOCAL
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
DGS-3120-24TC:admin#
53-11 show lldp remote_ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)