D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
578
Restrictions
None.
Example
To display remote entry information:
DGS-3120-24TC:admin#show lldp_med remote_ports 1:1
Command: show lldp_med remote_ports 1:1
Port ID : 1:1
---------------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis ID Subtype : MAC Address
Chassis ID : 00-01-02-03-04-00
Port ID Subtype : Net Address
Port ID : 172.18.10.11
LLDP-MED capabilities:
LLDP-MED Device Class: Endpoint Device Class III
LLDP-MED Capabilities Support:
Capabilities : Support
Network Policy : Support
Location Identification : Support
Extended Power Via MDI : Support
Inventory : Support
LLDP-MED Capabilities Enabled:
Capabilities : Enabled
Network Policy : Enabled
Location Identification : Enabled
Extended Power Via MDI : Enabled
Inventory : Enabled
Network Policy:
Application Type : Voice
VLAN ID :
Priority :
DSCP :
Unknown : True
Tagged :
Application Type : Softphone Voice
VLAN ID : 200
Priority : 7
DSCP : 5
Unknown : False
Tagged : True
Location Identification:
Location Subtype: CoordinateBased

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)