D-Link xStack DGS-3120 Series - Page 600

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
595
Example
To enable the MAC-based Access Control global state:
DGS-3120-24TC:admin# enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DGS-3120-24TC:admin#
57-2 disable mac_based_access_control
Description
This command is used to disable MAC-based Access Control.
Format
disable mac_based_access_control
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the MAC-based Access Control global state:
DGS-3120-24TC:admin# disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DGS-3120-24TC:admin#
57-3 config mac_based_access_control password
Description
This command is used to configure the RADIUS authentication password for MAC-based Access
Control.
Format
config mac_based_access_control password <passwd 16>