D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
600
DGS-3120-24TC:admin# config mac_based_access_control ports 1:1-1:8 aging_time
infinite block_time 120
Command: config mac_based_access_control ports 1:1-1:8 aging_time infinite
block_time 120
Success.
DGS-3120-24TC:admin#
57-8 create mac_based_access_control
Description
This command is used to assign a static 802.1Q VLAN as a MAC-based Access Control guest
VLAN.
Format
create mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-
4094>]
Parameters
guest_vlan - Specify MAC-based Access Control guest VLAN by name, it must be a static 1Q
VLAN.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
guest_vlanid - Specify MAC-based Access Control guest VLAN by VID, it must be a static 1Q
VLAN.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a MAC-based Access Control guest VLAN:
DGS-3120-24TC:admin# create mac_based_access_control guest_vlan VLAN8
Command: create mac_based_access_control guest_vlan VLAN8
Success.
DGS-3120-24TC:admin#
57-9 delete mac_based_access_control
Description
This command is used to remove a MAC-based Access Control guest VLAN.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)