D-Link xStack DGS-3120 Series - Page 612

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
607
DGS-3120-24TC:admin#show mac_based_access_control
Command: show mac_based_access_control
MAC-based Access Control
------------------------------------
State : Disabled
Method : Local
Password Type : Manual String
Password : default
Max User : No Limit
Guest VLAN :
Guest VLAN Member Ports:
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
Log State : Enabled
DGS-3120-24TC:admin#
57-16 show mac_based_access_control_local
Description
This command is used to display the MAC-based Access Control local database entry(s).
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac - (Optional) Displays MAC-based Access Control local database entries for a specific MAC
address.
<macaddr> - Enter the MAC address used here.
vlan - (Optional) Displays MAC-based Access Control local database entries for a specific target
VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - (Optional) Displays MAC-based Access Control local database entries for a specific
target VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
If the parameter is no specified, displays all MAC-based Access Control local database entries.
Restrictions
None.
Example
To show MAC-based Access Control local database for the VLAN called ‘default’: