D-Link xStack DGS-3120 Series - Page 615

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
610
Example
To enable trap state of MAC-based Access Control:
DGS-3120-24TC:admin# config mac_based_access_control trap state enable
Command: config mac_based_access_control trap state enable
Success.
DGS-3120-24TC:admin#
57-20 config mac_based_access_control log state
Description
This command is used to enable or disable generating of MAC-based Access Control logs.
Format
config mac_based_access_control log state [enable | disable]
Parameters
enable - Enable log for MAC-based Access Control. The log of MAC-based Access Control will
be generated.
disable - Disable log for MAC-based Access Control.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable log state of MAC-based Access Control:
DGS-3120-24TC:admin# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DGS-3120-24TC:admin#