D-Link xStack DGS-3120 Series - Page 630

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
625
DGS-3120-24TC:admin#show mld
Command: show mld
MLD Interface Configurations
MRT = Maximum Response Time, LLQI = Last Listener Query Interval
Interface Version Query MRT Robustness LLQI State
------------ ------- ------ ------ ---------- ------ --------
System 1 125 10 2 1 Enabled
Total Entries: 1
DGS-3120-24TC:admin#
61-3 show mld group
Description
This command is used to display the MLD group member table.
Format
show mld group {ipif <ipif_name 12> | group <ipv6addr>}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name.
group - (Optional) Specify the IPv6 multicast group address.
<ipv6addr> - Enter the IPv6 multicast group address.
Restrictions
None.
Example
To display all the MLD group member information:
DGS-3120-24TC:admin#show mld group
Command: show mld group
Interface Multicast Group Expiry
------------ ------------------------------ ------
System FF1E::100:0:0:20 260
Total Entries : 1
DGS-3120-24TC:admin#