D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
637
Example
To disable MLD snooping on the Switch:
DGS-3120-24TC:admin# disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3120-24TC:admin#
63-7 show mld_snooping
Description
This command is used to display the current MLD snooping configuration on the Switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view the IGMP snooping
configuration.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the IGMP snooping
configuration.
<vlanid_list> - Enter the VLAN ID list here.
If VLAN is not specified, the system will display all current MLD snooping configurations.
Restrictions
None.
Example
To show MLD snooping:

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)