D-Link xStack DGS-3120 Series - Page 682

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
677
Format
delete [igmp_snooping | mld_snooping] multicast_vlan_group_profile [profile_name
<profile_name 1-32> | all]
Parameters
igmp_snooping - Specify to delete an IGMP snooping group profile.
mld_snooping - Specify to delete an MLD snooping group profile.
profile_name - Specify the multicast VLAN profile name.
<profile_name 1-32> - Enter the multicast VLAN profile name here. This name can be up to
32 characters long.
all - Specify to delete all the multicast VLAN profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IGMP snooping multicast group profile with the name “MOD”:
DGS-3120-24TC:admin# delete igmp_snooping multicast_vlan_group_profile
profile_name MOD
Command: delete igmp_snooping multicast_vlan_group_profile profile_name MOD
Success.
DGS-3120-24TC:admin#
66-8 show [igmp_snooping | mld_snooping]
multicast_vlan_group_profile
Description
This command is used to show the IGMP snooping or MLD snooping multicast group profiles.
Format
show [igmp_snooping | mld_snooping ] multicast_vlan_group_profile {< profile_name 1-
32>}
Parameters
igmp_snooping - Specify that an IGMP snooping multicast group profile should be displayed.
mld_snooping - Specify that an MLD snooping multicast group profile should be displayed.
multicast_vlan_group_profile - Specify the profile name of the existing multicast VLAN profile
that should be displayed.
<profile_name 1-32> - (Optional) Enter the multicast VLAN group profile name here. The
name can be up to 32 characters long.
Restrictions
None.