D-Link xStack DGS-3120 Series - Page 811

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
806
seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the C-BSR on the interface “System”:
DGS-3120-24TC:admin#config pim6 cbsr ipif System state enable priority 64
hash_masklen 126
Command: config pim6 cbsr ipif System state enable priority 64 hash_masklen 126
Success.
DGS-3120-24TC:admin#
81-4 show pim6 cbsr
Description
This command is used to display the candidate bootstrap router related information.
Format
show pim6 cbsr
Parameters
None.
Restrictions
None.
Example
To show C-BSR settings on the Switch:
DGS-3120-24TC:admin#show pim6 cbsr
Command: show pim6 cbsr
PIM6 Candidate-BSR Information
--------------------------------------
C-BSR Interface Name : System
C-BSR Priority : 64
C-BSR Hash Mask Len : 126
DGS-3120-24TC:admin#