D-Link xStack DGS-3120 Series - Page 813

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
808
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a multicast group range “FF1E::12EF:1023/64” into the serve list of the C-RP “System”:
DGS-3120-24TC:admin#create pim6 crp group FF1E::12EF:1023/64 rp System
Command: create pim6 crp group FF1E::12EF:1023/64 rp System
Success.
DGS-3120-24TC:admin#
81-7 delete pim6 crp group
Description
This command is used to delete a multicast group range from the C-RP serve list.
Format
delete pim6 crp group <ipv6networkaddr>
Parameters
<ipv6networkaddr> - Specify the multicast group address range of the C-RP entry to be
removed from C-RP serve list.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a multicast group range “FF1E::12EF:1023/64” from the C-RP serve list:
DGS-3120-24TC:admin#delete pim6 crp group FF1E::12EF:1023/64
Command: delete pim6 crp group FF1E::12EF:1023/64
Success.
DGS-3120-24TC:admin#
81-8 enable pim6
Description
This command is used to enable the PIM global state for an IPv6 network.