D-Link xStack DGS-3120 Series - Page 814

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
809
Format
enable pim6
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the PIM global state for an IPv6 network:
DGS-3120-24TC:admin#enable pim6
Command: enable pim6
Success.
DGS-3120-24TC:admin#
81-9 disable pim6
Description
This command is used to disable the PIM global state for an IPv6 network.
Format
disable pim6
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable PIM-SM for an IPv6 network:
DGS-3120-24TC:admin#disable pim6
Command: disable pim6
Success.
DGS-3120-24TC:admin#