D-Link xStack DGS-3120 Series - Page 886

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
881
DGS-3120-24TC:admin#show route redistribute
Command: show route redistribute
Route Redistribution Settings
Source Destination Type Metric RouteMapName
Protocol Protocol
-------- ------------ -------- ------------ ------------
OSPF RIP Internal 2 N/A
RIP OSPF Type-1 2 N/A
Total Entries : 2
DGS-3120-24TC:admin#
89-12 show route redistribute dst ospf (RI Mode Only)
Description
This command is used to display the redistribution with the target protocol OSPF.
Format
show route redistribute dst ospf {src [local | static | rip]}
Parameters
src - (Optional) Specify the source protocol.
local - Display the redistribution with the source local.
static - Display the redistribution with the source static.
rip - Display the redistribution with the source protocol RIP.
Restrictions
None.
Example
To display the redistribution with the target protocol OSPF: