D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
894
92-3 delete backup
Description
This command is used to delete schedule backup.
Format
delete backup [config | log] [all | time_range <range_name 32> {filename <pathname>}]
Parameters
config - Schedule to back up configuration.
log - Schedule to back up log.
all - Delete all the schedules.
time_range - The time range of schedule backup that wants to be deleted.
<range_name32> - Enter the name of the time range. Maximum 32 characters.
filename - (Optional) The backup filename of the configuration or log that wants to be deleted.
<pathname> - Enter the backup file path name.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete all the schedules:
DGS-3120-24TC:admin# delete backup config all
Command: delete backup config all
Success.
DGS-3120-24TC:admin#
92-4 show backup
Description
This command is used to show schedule backup.
Format
show backup {config | log}
Parameters
config - Display the backup schedules for configuration.
log - Display the backup schedules for log.
Restrictions
None.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)