D-Link xStack DGS-3120 Series - Page 92

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
87
Parameters
<string 15> - (Optional) Specify the built-in or user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all AAA server groups:
DGS-3120-24TC:admin#show aaa server_group
Command: show aaa server_group
Group Name IP Address Protocol
--------------- --------------------------------------- --------
mix_1 --------------------------------------- --------
radius --------------------------------------- --------
tacacs --------------------------------------- --------
tacacs+ --------------------------------------- --------
xtacacs --------------------------------------- --------
Total Entries : 5
DGS-3120-24TC:admin#
5-35 create accounting method_list_name
Description
This command is used to create a user-defined list of accounting methods for accounting services
on the Switch. The maximum supported number of accounting method lists is 8.
Format
create accounting method_list_name <string 15>
Parameters
<string 15> - Specify the built-in or user-defined method list.
Restrictions
Only Administrator-level users can issue this command.