D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
86
Example
To add an AAA server host with an IP address of 10.1.1.222 to server group “mix_1”, specifying
the TACACS+ protocol:
DGS-3120-24TC:admin# config aaa server_group group_name mix_1 add server_host
10.1.1.222 protocol tacacs+
Command: config aaa server_group group_name mix_1 add server_host 10.1.1.222
protocol tacacs+
Success.
DGS-3120-24TC:admin#
5-33 delete aaa server_group
Description
This command is used to delete a group of user-defined AAA servers.
Format
delete aaa server_group <string 15>
Parameters
<string 15> - Specify the server group name to be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a user-defined AAA server group called “mix_1”:
DGS-3120-24TC:admin#delete aaa server_group mix_1
Command: delete aaa server_group mix_1
Success.
DGS-3120-24TC:admin#
5-34 show aaa server_group
Description
This command is used to display the groups of AAA servers groups.
Format
show aaa server_group {<string 15>}

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)