D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
940
Format
show surveillance_vlan {[oui | ports {<portlist>} | device {ports <portlist>}]}
Parameters
oui - (Optional) The OUI information of the surveillance VLAN.
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - (Optional) Enter a range of ports to be displayed.
device - (Optional) The Surveillance devices that are learned through their OUI.
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display the surveillance VLAN global information when surveillance VLAN is enabled:
GS-3120-24TC:admin#show surveillance_vlan
Command: show surveillance_vlan
Surveillance VLAN State : Enabled
VLAN ID : 2
VLAN Name : v2
Priority : 6
Aging Time : 60 minutes
Log State : Enabled
Member Ports :
Dynamic Member Ports :
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)