D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
950
Example
To show the sFlow information:
DGS-3120-24TC:admin#show sflow
Command: show sflow
sFlow Version : V5
sFlow Address : 10.90.90.90
sFlow State : Disabled
DGS-3120-24TC:admin#
98-13 show sflow flow_sampler
Description
This command is used to show the sFlow flow sampler configured for ports. The actual value rate
is 256 times the displayed rate value. There are two types of rates. The Configured Rate is
configured by the user. In order to limit the number of packets sent to the CPU when the rate of
traffic to the CPU is high, the sampling rate will be decreased. This is specified as the active rate.
Format
show sflow flow_sampler
Parameters
None.
Restrictions
None.
Example
To show the sFlow flow sampler information of ports which have been created:
DGS-3120-24TC:admin#show sflow flow_sampler
Command: show sflow flow_sampler
Port Analyzer Server ID Configured Rate Active Rate Max Header Size
---- ------------------ --------------- ----------- ---------------
1:1 1 0 0 18
Total Entries: 1
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)