D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
951
98-14 show sflow counter_poller
Description
This command is used to display the sFlow counter pollers which have been configured for port.
Format
show sflow counter_poller
Parameters
None.
Restrictions
None.
Example
To show the sFlow counter poller information of ports which have been created:
DGS-3120-24TC:admin#show sflow counter_poller
Command: show sflow counter_poller
Port Analyzer Server ID Polling Interval (sec)
---- ------------------ -----------------------
1:1 1 Disable
Total Entries: 1
DGS-3120-24TC:admin#
98-15 show sflow analyzer_server
Description
This command is used to show the sFlow analyzer server information. The Timeout field specifies
the time configured by user. The Current Countdown Time is the current time remaining before the
server timeout.
Format
show sflow analyzer_server
Parameters
None.
Restrictions
None.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)