D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
991
102-2 disable sim
Description
This command is used to disable single IP management on the Switch.
Format
disable sim
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable SIM:
DGS-3120-24TC:admin# disable sim
Command: disable sim
Success.
DGS-3120-24TC:admin#
102-3 show sim
Description
This command is used to display the current information of the specific sort of devices.
Format
show sim {[candidates {<candidate_id 1-100>} | members{<member_id 1-32>} | group
{commander_mac <macaddr>} | neighbor]}
Parameters
candidates - (Optional) Specify the candidate devices.
<candidate_id 1-100> - (Optional) Enter the candidate device ID here. This value must be
between 1 and 100.
members - (Optional) Specify the member devices.
<member_id 1-32> - (Optional) Enter the member device ID here. This value must be
between 1 and 32.
group - (Optional) Specify other group devices.
commander_mac - (Optional) Specify the commander MAC address used.
<macaddr> - Enter the commander MAC address used here.
neighbor - (Optional) Specify other neighbor devices.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)