6.3. Selection of setpoint source
The selected "setpoint source" serves to provide the inverter with its setpoint. The
setpoint source can be selected individually for each operating mode.
Possible setpoint sources are:
• Analog inputs
• Keypad
• Network
• Parameterisable setpoints (presets)
• Digital inputs (configured as HTL input for pulse train or HTL encoder)
• "Motor potentiometer" function
• "Sequencer" function
Details
• For applications only requiring one setpoint it is sufficient to define the standard
setpoint source in the following parameters.
• For applications requiring a change-over of the setpoint source during operation, the
functions for setpoint change-over have to be configured accordingly. Setpoint
change-over
378
To Next Page
Loading...
