Emotron VS10 - Device Identification

5.2.10. Device identification
The following parameters show some general information about the inverter.
Parameter
Name / value range / [default setting]
Info
0x2000:001
(P190.01)
Product code
(Product code)
Read only
Product code of the complete device.
Example: "VS10-23-1P7-20"
0x2000:002
(P190.02)
Serial number
(Serial number)
Read only
Serial number of the complete device.
Example: "0000000000000000XYZXYZ"
0x2000:004
(P190.04)
CU firmware version
(CU firmware ver.)
Read only
Firmware version of the control unit.
Example: "01.00.01.00"
0x2000:005
(P190.05)
CU firmware type
(CU firmware type)
Read only
Firmware type of the control unit.
Example: "IOFW51AC10"
0x2000:006
(P190.06)
CU bootloader version
(CU bootlder ver.)
Read only
Bootloader version of the control unit.
Example: "00.00.00.13"
0x2000:007
(P190.07)
CU bootloader type
(CU bootlder type)
Read only
Bootloader type of the control unit.
Example: "IOBL51AOnn"
0x2000:008
(P190.08)
Object directory version
(OBD version)
Read only
Example: "108478"
0x2000:010
(P190.10)
PU firmware version
(PU firmware ver.)
Read only
Firmware version of the power unit.
Example: "00202"
0x2000:011
(P190.11)
PU firmware type
(PU firmware type)
Read only
Firmware type of the power unit.
Example: "IDFW5AA"
0x2000:012
(P190.12)
PU bootloader version
(PU bootlder ver.)
Read only
Bootloader version of the power unit.
0x2000:013
(P190.13)
PU bootloader type
(PU bootlder type)
Read only
Bootloader type of the power unit.
0x2001
(P191.00)
Device name
(Device name)
["My Device"]
Any device name (e.g. "Wheel drive") can be set in this object for the
purpose of device identification.