Emotron VS10 User Manual

90 01-6203-01R3, CG Drives & Automation
5.2.5. Diagnostics of the inputs and outputs
5.2.5.1. Digital inputs and outputs
The following parameters serve to diagnose the digital inputs and outputs of the inverter.
Parameter
Name / value range / [default setting]
Info
0x60FD
(P118.00)
Digital inputs
(Digital inputs)
•
Read only
Bit coded display of the current state of the digital inputs
Bit 16
Level of digital input 1
0 ≡ LOW level, 1 ≡ HIGH level.
Bit 17
Level of digital input 2
Bit 18
Level of digital input 3
Bit 19
Level of digital input 4
Bit 20 Level of digital input 5
Bit 21
Level of digital input 6
(not supported)
Bit 22
Level of digital input 7
Bit 25
Internal interconnection of digital inputs
0 ≡ digital input terminals are set to HIGH level via pull-up resistors.
1 ≡ digital input terminals are set to LOW level via pull-down resistors.
0x4016:005
Digital output 1: Terminal state
•
Read only
Display of the logic state of output terminal X3/DO1.
0
FALSE
1 TRUE
0x4016:006
Digital output 1: Trigger signal state
•
Read only
Display of the logic state of the trigger signal for digital output 1
(without taking a ON/OFF delay set and inversion into consideration).
0
FALSE
1 TRUE
0x4018:005
Relay: Relay state
•
Read only
Display of the logic state of the relay.
0
FALSE
1
TRUE
0x4018:006
Relay: Trigger signal state
•
Read only
Display of the logic state of the trigger signal for the relay (without
taking a ON/OFF delay set and inversion into consideration).
0
FALSE
1
TRUE
Related topics
 Configuration of digital inputs  422
 Configuration of digital outputs  429

Emotron VS10 Specifications

General

Brand	Emotron
Model	VS10
Category	Controller
Language	English