Emotron VS10 - Motor Control Selection

126 01-6203-01R3, CG Drives & Automation
7.2. Motor control selection
The inverter supports different modes for closed-loop/open-loop motor control.
Parameter
Name / value range / [default setting]
Info
0x2C00
(P300.00)
Motor control mode
(Motor ctrl mode)
•
Setting can only be changed if the inverter is
inhibi
ted.
Selection of the motor control type.
3
Sensorless control (SL PSM)
(from
version 02.00)
This control type is used for the sensorless control of a synchronous
motor.
 Sensorless control for synchronous motors (SL-PSM)

118
4
Sensorless vector control (SLVC)
This control type is used for sensorless vector control of an
asynchronous motor.
 Sensorless vector control (SLVC)

115
6
V/f characteristic control (VFC open loop)
This control mode is used for the speed control of an asynchronous
motor via a V/f characteristic and is the simplest control mode.
 V/f characteristic control (VFC)

110
In the following subchapters, each motor control is described in detail.