Emotron VS10 - Modbus Diagnostics

5.2.4.2. Modbus diagnostics
The following parameters serve to diagnose the Modbus interface and communication via
Modbus.
Preconditions
Control unit (CU) of the inverter is provided with Modbus.
Parameter
Name / value range / [default setting]
Info
0x2322:001
(P511.01)
Active Modbus settings: Active node ID (Modbus
diag.: Active node ID)
Read only
Display of the active node address.
0x2322:002
(P511.02)
Active Modbus settings: Active baud rate (Modbus
diag.: Active baud rate)
Read only
Display of the active baud rate.
0x2322:003
(P511.03)
Active Modbus settings: Data format (Modbus diag.:
Data format)
Read only
Display of the active data format.
0x232A:001
(P580.01)
Modbus statistics: Messages received (Modbus
statistic: Mess. received)
Read only
Display of the total number of messages received.
This counter counts both valid and invalid messages.
After the maximum value has been reached, the counter starts again
"0".
0x232A:002
(P580.02)
Modbus statistics: Valid messages received (Modbus
statistic: Val. mess. rec.)
Read only
Display of the number of valid messages received.
After the maximum value has been reached, the counter starts again
"0".
0x232A:003
(P580.03)
Modbus statistics: Messages with exceptions
(Modbus statistic: Mess. w. exc.)
Read only
Display of the number of messages with exceptions that have been
received.
After the maximum value has been reached, the counter starts again
"0".
0x232A:004
(P580.04)
Modbus statistics: Messages with errors (Modbus
statistic: Mess. w. errors)
Read only
Display of the number of messages received with a faulty data integrity
(parity, CRC).
After the maximum value has been reached, the counter starts again
"0".
0x232A:005
(P580.05)
Modbus statistics: Messages sent (Modbus statistic:
Messages sent)
Read only
Display of the total number of messages sent.
After the maximum value has been reached, the counter starts again
"0".
Related topics
 Modbus RTU  220