Emotron VS10 - Page 366

366 01-6203-01R3, CG Drives & Automation
Parameter
Name / value range / [default setting]
Info
0x403A:007
(P855.07)
Sequence 6: Step 7
(Sequence 6: Step 7)
For further possible settings, see parameter
0x403A:001 (P855.01).

348
0 Skip step
0x403A:008
(P855.08)
Sequence 6: Step 8
(Sequence 6: Step 8)
For further possible settings, see parameter
0x403A:001 (P855.01).  348
0
Skip step
0x403A:009
(P855.09)
Sequence 6: Step 9
(Sequence 6: Step 9)
For further possible settings, see parameter
0x403A:001 (P855.01).  348
0
Skip step
0x403A:010
(P855.10)
Sequence 6: Step 10
(Sequence 6: Step 10)
For further possible settings, see parameter
0x403A:001 (P855.01).  348
0
Skip step
0x403A:011
(P855.11)
Sequence 6: Step 11
(Sequence 6: Step 11)
For further possible settings, see parameter
0x403A:001 (P855.01).

348
0
Skip step
0x403A:012
(P855.12)
Sequence 6: Step 12
(Sequence 6: Step 12)
For further possible settings, see parameter
0x403A:001 (P855.01).

348
0
Skip step
0x403A:013
(P855.13)
Sequence 6: Step 13
(Sequence 6: Step 13)
For further possible settings, see parameter
0x403A:001 (P855.01).

348
0
Skip step
0x403A:014
(P855.14)
Sequence 6: Step 14
(Sequence 6: Step 14)
For further possible settings, see parameter
0x403A:001 (P855.01).  348
0
Skip step
0x403A:015
(P855.15)
Sequence 6: Step 15
(Sequence 6: Step 15)
For further possible settings, see parameter
0x403A:001 (P855.01).  348
0
Skip step
0x403A:016
(P855.16)
Sequence 6: Step 16
(Sequence 6: Step 16)
For further possible settings, see parameter
0x403A:001 (P855.01).

348
0
Skip step
0x403B
(P856.00)
Number of cycles sequence 6
(Cycl. sequence 6)
1 ... [1] ... 65535
From version 03.00
Definition of how often the sequence 6 is to be passed through.
1 = one pass, 2 = two passes, ...
65535 = infinite number of cycles.
0x403C:001
(P860.01)
Sequence 7: Step 1
(Sequence 7: Step 1)
Configuration of the steps 1 ... 16 for sequence 7.
Alternatively to calling a single segment, a complete sequence (with a
higher number) can also be called from one step. This, for instance,
serves to configure a main sequence from which several
subsequences are called successively.
With the setting "0", the respective step is skipped.
-8 Sequence 8
0
Skip step
1
Segment 1