392 01-6203-01R3, CG Drives & Automation
The
s
t
atus
signals
c
an
be
assigned
t
o
digital
outputs.
Configuration
of
digital
outputs
429
① If quick stop is activated, the motor is decelerated to the frequency setpoint 0 Hz
within a short period of time. The "Quick stop active [54]" status is set as long as
quick stop is activated. The "Stop active [53]" status is not set.
② An active stop command is interrupted by a quick stop.
③ If quick stop is cancelled again before standstill is reached, stopping is continued
with the stop method set in 0x2838:003 (P203.03). In the example: Stop with
standard ramp.
To Next Page
Loading...
