394 01-6203-01R3, CG Drives & Automation
The
s
t
atus
signals
c
an
be
assigned
t
o
digital
outputs.
Configuration
of
digital
outputs
429
① If "Jog foward (CW)" and "Jog reverse (CCW)" are activated at the same time, the
motor is stopped with the stop method set in 0x2838:003 (P203.03) and the jog
operation must be triggered again.
② The jog operation cannot be terminated with the "Run" function but only by
cancelling the jog command.
To Next Page
Loading...
