Emotron VS10 - Page 405

Parameter
Name / value range / [default setting]
Info
0x2631:018
(P400.18)
Function list: Activate preset (bit 0)
(Function list: Setp: Preset b0)
For further possible settings, see parameter
0x2631:001 (P400.01).  364
Assignment of a trigger for the "Activate preset (bit 0)" function.
Selection bit with the valency 20 for the bit-coded selection and activa-
tion of a parameterised setpoint (preset value).
Trigger = FALSE: selection bit = "0".
Trigger = TRUE: selection bit = "1".
14 Digital input 4 State of X3/DI4, taking an inversion set in 0x2632:004 (P411.04) into
consideration.
0x2631:019
(P400.19)
Function list: Activate preset (bit 1)
(Function list: Setp: Preset b1)
For further possible settings, see parameter
0x2631:001 (P400.01).  364
Assignment of a trigger for the "Activate preset (bit 1)" function.
Selection bit with the valency 21 for the bit-coded selection and activa-
tion of a parameterised setpoint (preset value).
Trigger = FALSE: selection bit = "0".
Trigger = TRUE: selection bit = "1".
15
Digital input 5
State of X3/DI5, taking an inversion set in 0x2632:005 (P411.05) into
consideration.
0x2631:020
(P400.20)
Function list: Activate preset (bit 2)
(Function list: Setp: Preset b2)
For further possible settings, see parameter
0x2631:001 (P400.01).  364
Assignment of a trigger for the "Activate preset (bit 2)" function.
Selection bit with the valency 22 for the bit-coded selection and activa-
tion of a parameterised setpoint (preset value).
Trigger = FALSE: selection bit = "0".
Trigger = TRUE: selection bit = "1".
0
Not connected
No trigger assigned (trigger is constantly FALSE).
0x2631:021
(P400.21)
Function list: Activate preset (bit 3)
(Function list: Setp: Preset b3)
For further possible settings, see parameter
0x2631:001 (P400.01).  364
Assignment of a trigger for the "Activate preset (bit 3)" function.
Selection bit with the valency 2
3
for the bit-coded selection and activa-
tion of a parameterised setpoint (preset value).
Trigger = FALSE: selection bit = "0".
Trigger = TRUE: selection bit = "1".
0
Not connected
No trigger assigned (trigger is constantly FALSE).
0x2911:001
(P450.01)
Frequency setpoint presets: Preset 1
(Freq. presets: Freq. preset 1)
0.0 ... [20.0] ... 599.0 Hz
Parameterisable frequency setpoints (presets) for operating mode "MS:
Velocity mode".
0x2911:002
(P450.02)
Frequency setpoint presets: Preset 2
(Freq. presets: Freq. preset 2)
0.0 ... [40.0] ... 599.0 Hz
0x2911:003
(P450.03)
Frequency setpoint presets: Preset 3
(Freq. presets: Freq. preset 3)
Device for 50-Hz mains: 0.0 ... [50.0] ... 599.0 Hz
Device for 60-Hz mains: 0.0 ... [60.0] ... 599.0 Hz
0x2911:004
(P450.04)
Frequency setpoint presets: Preset 4
(Freq. presets: Freq. preset 4)
0.0 ... [0.0] ... 599.0 Hz
0x2911:005
(P450.05)
Frequency setpoint presets: Preset 5
(Freq. presets: Freq. preset 5)
0.0 ... [0.0] ... 599.0 Hz
0x2911:006
(P450.06)
Frequency setpoint presets: Preset 6
(Freq. presets: Freq. preset 6)
0.0 ... [0.0] ... 599.0 Hz
0x2911:007
(P450.07)
Frequency setpoint presets: Preset 7
(Freq. presets: Freq. preset 7)
0.0 ... [0.0] ... 599.0 Hz
0x2911:008
(P450.08)
Frequency setpoint presets: Preset 8
(Freq. presets: Freq. preset 8)
0.0 ... [0.0] ... 599.0 Hz
0x2911:009
(P450.09)
Frequency setpoint presets: Preset 9
(Freq. presets: Freq. preset 9)
0.0 ... [0.0] ... 599.0 Hz
0x2911:010
(P450.10)
Frequency setpoint presets: Preset 10
(Freq. presets: Freq. preset 10)
0.0 ... [0.0] ... 599.0 Hz
0x2911:011
(P450.11)
Frequency setpoint presets: Preset 11
(Freq. presets: Freq. preset 11)
0.0 ... [0.0] ... 599.0 Hz
0x2911:012
(P450.12)
Frequency setpoint presets: Preset 12
(Freq. presets: Freq. preset 12)
0.0 ... [0.0] ... 599.0 Hz
0x2911:013
(P450.13)
Frequency setpoint presets: Preset 13
(Freq. presets: Freq. preset 13)
0.0 ... [0.0] ... 599.0 Hz
0x2911:014
(P450.14)
Frequency setpoint presets: Preset 14
(Freq. presets: Freq. preset 14)
0.0 ... [0.0] ... 599.0 Hz
0x2911:015
(P450.15)
Frequency setpoint presets: Preset 15
(Freq. presets: Freq. preset 15)
0.0 ... [0.0] ... 599.0 Hz