Epson EPL-N3000 - Cover Right

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly Cover 168
Confidential
4.2.2 COVER RIGHT
Removal
1. Loosen the one screw securing the COVER RIGHT.
2. Move the COVER RIGHT in the direction of the arrow, and release the two
bottom, one front, and one rear hooks that are securing the COVER RIGHT to the
printer body.
3. Move the COVER RIGHT downward to release the three hooks at the top, and
remove the COVER RIGHT from the printer body.
Installation
1. While moving the COVER RIGHT upward, install it to the printer body, and lock
the three hooks at the top.
2. Move the COVER RIGHT in the direction of the printer body front, and secure the
COVER RIGHT with the two bottom, one front, and one rear hooks.
3. Secure the COVER RIGHT with the one screw in the rear of the printer body.
Figure 4- 5. COVER RIGHT Removal
JG3004EA
(2)
(3)
COVER
RIGHT
1)
2)