Epson EPL-N3000 - Pwba Feeder 550

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly Option 550 Paper Feeder 310
Confidential
4.11.8 PWBA FEEDER 550
Removal
1. Remove the COVER RIGHT PLATE. (p.304)
2. Disconnect the harness from the connectors (P/J80, P/J81, P/J82, P/J83, P/J84 and
P/J85) of the PWBA FEEDER 550.
3. Remove the two screws (gold, tapping, 8mm) securing the PWBA FEEDER 550
to the frame.
4. Remove the PWBA FEEDER 550.
Installation
1. Install the PWBA FEEDER 550 to the frame with the two screws (gold, tapping,
8mm).
2. Connect the harness connectors to the connectors (P/J80, P/J81, P/J82, P/J83, P/
J84, P/J85) of the PWBA FEEDER 550.
3. Install the COVER RIGHT PLATE. (p.304)
Figure 4- 115. PWBA FEEDER 550 Removal
C A U T I O N
 One of the screws securing the PWBA FEEDER 550 is also
securing the FRAME TOP ASSY.
 When installing it, match the positioning holes of the PWBA
FEEDER 550 with the bosses of the FRAME CVR R550.
JG3509AA
PWBA FEEDER 550
P/J82
85
81 84 83
80
BOSS
4)
3)