Epson EPL-N3000 - Interlock S;W Rear

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly Electrical 291
Confidential
4.10.5 INTERLOCK S/W REAR
Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the COVER LEFT. (p.169)
4. Remove the COVER RIGHT. (p.168)
5. Remove the COVER EXIT 500. (p.261)
6. Remove the 500 EXIT ASSY. (p.262)
7. Remove the COVER TOP, CONTROL PANEL. (p.170)
8. Remove the COVER FRONT. (p.172)
9. Remove the SHIELD PLATE LVPS. (p.285)
10. Disconnect the connector (P/J44) of the INTERLOCK S/W REAR from the
LVPS.
11. Release the HARNESS ASSY INTERLOCK 2 of the INTERLOCK S/W REAR
from the clamp of the GEAR ASSY HOUSING.
12. Remove the one screw (silver, 6mm) securing the INTERLOCK S/W REAR to the
frame.
13. Remove the INTERLOCK S/W REAR.
Figure 4- 96. INTERLOCK S/W REAR Removal
JG3175A
A
INTERLOCK S/W REAR
11)
9)