Epson EPL-N3000 - Controller Specifications

EPSON EPL-N3000/AcuLaser M4000N Revision C
Product Description Product Specifications 29
Confidential
1.1.4 Controller Specifications
BASIC SPECIFICATIONS
EXTERNAL INTERFACES
Figure 1-6. External Interfaces
Item EPL-N3000 AcuLaser M4000N
CPU TMPR4955 (300MHz) RM7035C (500MHz)
Enhanced Technology PGI, RIT
*RIT and PGI are disabled while operating at 1200 dpi
RAM Standard (on-board) 64 MB 64MB
Maximum
512 MB
576MB
Expansion Type SDRAM 90 pin DIMM
Numbers of slot 2 slots
ROM Type 16-bit wide
Program
16MB
Font
Included in the program
Control panel 6 switches, 3 LEDs and 20
digits X 1 STN LCD with
white backlight
7 buttons, LCD (22
characters, 5 lines) and
3 LEDs
Printer language PostScripts 3, PCL6, LJ4,
GL2, ESC/P2, FX, I239X,
ESC/Page
ESC/Page (B/W), FX,
ESCP2, I239X, PCL5e,
PCL6, Adobe PostScript 3,
PDF 1.3
Auxiliary software
 DIAG mode
 Status Sheet
 USB Ext I/F StatusSheet
 Reserve Job List
 Form Overlay List
 Network Status Sheet
 AUX Status Sheet
 PS3 Status Sheet
 Hex dump
 SUPPORT MODE
 MAINTENANCE MODE
Item EPL-N3000 AcuLaser M4000N
Standard USB USB1.1 USB2.0 HS
Parallel
IEEE1284 compliant
Ethernet interface
100Base-TX/10Base-T
Optional
Type-B slot
Type-B slot
EPL-N3000
Parallel
Type-B slot
Network
AcuLaser
M4000N
USB
Parallel
Type-B slot
Network
USB