Epson EPL-N3000 - Harness Assy Fuser

EPSON EPL-N3000/AcuLaser M4000N Revision C
Disassembly and Assembly Xero 251
Confidential
4.7.7 HARNESS ASSY FUSER
Removal
1. Remove the COVER REAR 500. (p.270)
2. Remove the COVER REAR. (p.167)
3. Remove the FUSER ASSY. (p.253)
4. Remove the COVER LEFT. (p.169)
5. Remove the COVER RIGHT. (p.168)
6. Remove the COVER EXIT 500. (p.261)
7. Remove the 500 EXIT ASSY. (p.262)
8. Remove the COVER TOP, CONTROL PANEL. (p.170)
9. Remove the COVER FRONT. (p.172)
10. Remove the BTR ASSY. (p.254)
11. Remove the DUCT FRONT, FAN SUB. (p.241)
12. Remove the ROS ASSY. (p.239)
13. Remove the SHIELD PLATE ROS. (p.243)
14. Remove the GUIDE TRAY LEFT. (p.236)
15. Remove the MOTOR COVER. (p.277)
16. Remove the SHIELD PLATE LVPS. (p.285)
17. Remove the GUIDE CRU LEFT. (p.245)
18. Release the hooks of the COVER GUIDE CRU and remove the COVER GUIDE
CRU and HARNESS ASSY FUSER together from the GUIDE CRU LEFT.
Figure 4- 65. HARNESS ASSY FUSER Removal
C A U T I O N
Never give impact to the ROS ASSY with a screwdriver or the like.
C A U T I O N
Take care not to spread excessively the claw of the GUIDE CRU
LEFT; otherwise, the claw may break.
JG3063AA
GUIDE CRU LEFT
COVER GUIDE CRU
HARNESS ASSY FUSER
HOOK
HOOKS
CLAWS
18-2)
18-1)