Epson EPL-N3000 - Maintenance

EPSON EPL-N3000/AcuLaser M4000N Revision C
Maintenance Overview 406
Confidential
6.1.1 Maintenance
Regular Replacement Parts and Consumables are as follows:
The maintenance work of this printer does not require any special tool or grease.
*1: This print number indicates the approximate number of sheets that can be printed
during continuous printing using A4 size paper at 5% image coverage ratio.
The cartridge life varies according to the image occupation rate and type of printing
(continuous, intermittent, printing density, toner save mode).
*2: Included with main unit is 6k cartridge.
*3: Included with main unit is 7.5k cartridge.
Note : The standard time for replacement specified above is on the assumption that A4 LEF is
always used.
Figure 6-1. Regular Replacement Parts
Table 6-1. Regular Replacement Parts and Consumables
Name Component Product Lifetime
*1
Imaging Cartridge
• OPC drum (organic photoconductor)
• Electrification roller
• Cleaning blade
• Developer
• Black single component
electromagnetic toner
• Waste toner box
• Toner agitate mechanism
 EPL-N3000
• Average 6,000 pages
*2
• Average 17,000 pages
 AcuLaser M4000N
• Average 7,500 pages
*3
• Average 20,000 pages
Fuser Unit
• Heat roller
200,000 pages
BTR ASSY
(EPL-N3000 only)
After printing of about 200,000 sheets
KIT ROLL ASSY FEED
After printing of about 200,000 sheets
(Two rollers mounted at each paper feed opening and one roller
mounted in each cassette)
Maintenance unit
(AcuLaser M4000N only)
After printing of about 200,000 sheets
Maintenance unit is composed of the following parts.
• BTR ASSY
• KIT ROLL ASSY FEED x 2 sets
(For MP Tray and Cassette 1)
FUSER ASSY
ROLL ASSY FEED
ROLL ASSY NUDGER

ROLL ASSY FEED
ROLL ASSY NUDGER
ROLL ASSY RETARD
150 Paper Cassette
550 Paper Cassette
Option
550 Paper Cassette
Option
550 Feeder
ROLL ASSY RETARD
ROLL ASSY RETARD
ROLL ASSY FEED
ROLL ASSY NUDGER
BTR ASSY
JG8104EA
A
B
C