Key-lock setting (p. 230)
HIGH-Z reject function setting (p. 222)
LCD setting (p. 233)
Beep sound setting (p. 234)
Panel loading and saving (p. 315)
System reset (p. 237)
Application settings
Memory function setting (p. 219)
IO trigger setting (p. 228)
I/O output setting of judgment results
(p. 226)
Set detection sensitivity for measurement
errors (p. 224)
Equivalent circuit analysis (p. 238)
* This key is displayed only when the
IM9000 Equivalent Circuit Analysis
Firmware has been installed.
EOM output method setting (p. 229)
Initial screen is displayed.
Trigger synchronous output function
(p. 235)
To Next Page
Loading...
